TAB, Tape Automated Bonding

The process of mounting the integrated circuit die directly to the surface of the substrate, and interconnecting the two together using a fine lead frame.

Termination

The metallization surfaces, or in some cases, metal end clips on the ends of passive chip components.

Thermal Cycling

A method to induce accelerated stress on components by heating and cooling in an air circulating oven to verify reliability.

Thermal Expansion Mismatch

The absolute difference in thermal expansion of two materials.

Thixotropic

The quality of certain materials that are paste or gel-like at rest but fluid when stressed.

Thru-Via

A via that is connected between the primary and secondary side of a double sided or multilayer packaging and interconnecting structure.

Tinning

A process for the application of solder coating on component leads, conductors and terminals to enhance solderability.

Type I SMA

SMT using surface mounted devices on one or both sides of the substrate. The assembly is reflow soldered in one or two passes depending on the configuration.

Type II SMA

SMT using surface mounted devices on one or both sides of the substrate and through-hole devices on the primary side. The assembly is reflow soldered on the primary side and wave soldered on the secondary side.